Equipment being applied

      Laser tracker is a high-tech measuring unit based on tracking principle when tracking special angle reflector with a laser beam. The laser beam emitted by the unit goes back to the lens when it gets in the center of angle reflector, and after that it goes to distance meter receiver. Considering two angles and distances it is possible to calculate actual special coordinates of the reflector (for example, X, Y, Z). Coordinates can be obtained both in static and dynamic mode.

Technical characteristic:

 API ТгаскегЗ

 Azimuth: ± 320º (640º end to end)

 Elevation: + 77º / -60º

 Angular Resolution: ± 0.018 arc seconds

 Angular Accuracy: 3.5μm/meter

 System Resolution: 0.1μm

 Maximum Lateral Target Speed: > 4 meters/sec

 Maximum Acceleration: > 2 g

 Internal Level Accuracy: ±2 arc-second

HeNe Laser (IFM) Class II (eye safe)

Resolution: 0.08μm

Accuracy: > ±0.5 ppm 

     Faro Prime arm.

     Mobile measuring machine, arm- type,  is a measuring unit composing of basement to be mounted on any plane surface or rested on a handy tripod and several  articulated elbows. Every articulated joint is equipped with angular movement transducers advising PCs of elbows mutual arrangement.  The software calculates coordinates of measuring probe being an end of the arm in real time mode.

     The unit operates in sphere, with probe having an easy access to every point inside the sphere. The arm is not motorized, translation of measuring probe and recording of measuring point are done manually, by operator.

      A six-axial measuring arm ensures the highest level of accuracy of linear and angle dimensions as compared to other universal arms. FARO Prime arm is equipped with wireless communication according to Bluetooth standard, and battery cell is of extended capacity. Probes of different types increase opportunities of measurements in hard to reach places.

    Main technical specifications of the FARO PRIME arm:

Working area - 3.7 m

Repeatability - 0.060 mm

The error of linear measurements is ± 0.085 mm

   

 

                  

                         Tacheometer Leica TDRA6000

   Quadruple size angle detection system with accuracy of up to 0.5 seconds of arc (1 σ) and is able to perform up to 5000 measurements per second. ATR and feedback-control loop encoder are optimized for use with angle reflectors of 1.5″ and are specially configured for use in the distance of up to 600 m.

  Tacheometer Leica TDRA6000 as well as the tracker can operate together with angle reflector under supervision of NRK Spatial Analyzer software.   

Performance goal fast search:

Power Search Performance 1.5” RRR & BRR

Max Volume 100 m

Min Distance 2.0 m

Positioning time1 < 5 seconds

Environmental specifications

Operating temperature –20° C to +50° C